Purchased May 2004 at the Allentown Pinball Wizards Convention.  It had a few issues like broken glass on and under the playfield.  The bottom right corner of the backbox needed to be repaired.  The DMD had a strange problem where I had to unplug and re-plug the ribbon cable after turning on the machine for the display to work correctly.  Changed the DMD controller card and now it works great.

It also needed a good cleaning and a shop job (new drop targets, rubbers, bulbs, and a few plastics).  I have a complete NOS decal set for it also since I'm missing a few on the drop targets.

The playfield had no wear other than the lip of the right hole (just left of the center ramp).  The whole playfield was very dirty though as you can see in the close-up of the flippers.